Road cover MICHELIN Protek Reflective Flank

Protek Michelin Features:

Protek 700x35C Michelin cover with a drawing that facilitates filming and with a rubber mixture that gives it excellent grip. The drawing, continuous in the center and with raised heels on the shoulders, gives it an excellent grip on wet and oily soil. The 1mm anti-prick reinforcement ensures effective protection for everyday use. With a progressive grooving rate, more important on the shoulders, for excellent grip on wet and oily soil. Drawing continuity in the center for better rolling performance.

MICHELIN TR

In the development of its bike covers, Michelin uses two types of hoops, flexible rings (TS) and rigid rings (TR).

Traditional bicycle cover manufacturing uses rigid rings, usually made of steel.

This material is heavier than the aramid fibers used for the manufacture of flexible rings but is much more economical.

Little or nothing used on high performance decks, with the exception of DH (Down Hill or descent) decks.

Specifications for each size:

700x28c

• Width (mm.): 28-622
• Width (inch): 700x28C
• Hoop: Rigid
• Weight: 575
• TPI: 22
• Pressure (bar): 4/6
• Pressure (psi): 58/87
• Camera: A2
• Reflective flank: Yes

700x35C

• Width (mm.): 37-622
• Width (inch): 700x20C
• Hoop: Rigid
• Weight: 730
• TPI: 22
• Pressure (bar): 2.5/6
• Pressure (psi): 37/87
• Camera: A3
• Reflective flank: Yes

700x38c

• Width (mm.): 40-622
• Width (inch): 700x38C
• Hoop: Rigid
• Weight: 760
• TPI: 22
• Pressure (bar): 2.5/6
• Pressure (psi): 37/87
• Camera: A3
• Reflective flank: Yes

700x40c

• TPI: 22.
• Pressure: 2.5/6.
• Measurements: 700x40
• Weight by manufacturer: 710 grs.